Filter
Furring channel roll forming machine
PUTAI Technology's furring channel roll forming machine produces light-gauge cold-formed metal furring channels — the level, ventilated fixing plane installed in front of a wall, ceiling or structural slab. The standard line covers 16 mm resilient channel, 28 mm hat channel and 38 mm hat channel, and also forms U-shaped profiles for partition framing.
Standard configuration: 10 forming stations with GCr15 hard-chrome plated rolls, 0.35–0.6 mm galvanized, galvalume or cold-rolled steel with a yield strength of 235–550 MPa, line speed up to 40 m/min, PLC control and a hydraulic tracking shear holding ±1 mm on cut length and ±0.3 mm on profile.
The quick-change cassette lets one furring channel roll forming machine switch between 16 mm resilient, 28 mm hat and 38 mm hat channels in under 30 minutes — one line instead of three.
Key Features
The furring channel roll forming machine is supplied as a complete line. Main configuration points:
1. Forming stations: 10 stations, GCr15 rolls, hard-chrome plated
2. Profile coverage: 16 mm resilient channel, 28 mm and 38 mm hat channel, plus U profiles for partition framing
3. Material: 0.35–0.6 mm galvanized, galvalume or cold-rolled steel, yield strength 235–550 MPa
4. Line speed: up to 40 m/min
5. Cutting: hydraulic tracking shear with Cr12MoV blade, ±1 mm, burr-free edge
6. Control and drive: PLC with servo tracking; 50 mm shafts, 45# steel, gear transmission
7. Roller material: Cr12
8. Changeover: quick-change cassette, under 30 minutes between 16/28/38 mm profiles
Profile and Size Range
The furring channel roll forming machine is built to your furring profile drawing. Standard coverage:
1. 16 mm resilient channel — the furring section for resilient ceiling and wall systems
2. 28 mm hat channel — general-purpose furring and batten profile
3. 38 mm hat channel — deeper furring section for larger cavity depth
Beyond these sizes, the roll set is made to your drawing. Because the cassette is quick-change, one machine can cover a family of profiles rather than a single fixed section.
Send your inquiry
Furring channel roll forming machine for metal furring channel: 40 m/min, 0.35-0.6 mm GI steel, ±0.3 mm tolerance. CE cold roll forming machine.
Putai Technology Factory's Hat Channel forming machine is ideal for producing metal profiles used in drywall partitions, ceilings, and other building structures.
An Omega Profile Roll Forming Machine is a specialized piece of industrial equipment designed for the continuous, high-volume production of metal profiles shaped like a hat. It operates by feeding a flat metal strip—typically galvanized steel, aluminum, or other alloys—through a series of precision-engineered rollers.
A hat channel roll forming machine is a specialized piece of industrial equipment designed for the continuous and high-volume production of hat channels, widely used in construction for lightweight structural framing, particularly in concealed grid gypsum ceiling systems and wall framings.
Putai Technology Factory's c u channel roll forming machine is ideal for producing metal profiles used in drywall partitions, ceilings, and other building structures.
Channel is a metal furring channel used as a component in our machine Clip sound proofing systems, designed to be used with the Clip to form high-performing sound proof walls and ceilings.
A resilient channel roll forming machine is a specialized cold roll forming line engineered to produce resilient furring channels — also called resilient channels, sound isolation channels or acoustic furring channels — which are widely used in drywall partitions and suspended ceiling systems.
A hat channel roll forming machine with quick change capability represents a significant advancement in metal fabrication technology, designed for producing the hat-shaped profiles essential for structural support in construction, particularly for drywall installation, ceilings, and framing systems.
Putai Technology Factory's F Angle Forming machine is ideal for producing metal profiles used in drywall partitions, ceilings, and other building structures.
Putai Technology Factory's Hat Channel forming machine is ideal for producing metal profiles used in drywall partitions, ceilings, and other building structures.
Putai Technology Factory's Furring Channel forming machine is ideal for producing metal profiles used in drywall partitions, ceilings, and other building structures.
Putai Technology Factory's C U Channel Forming machine is ideal for producing metal profiles used in drywall partitions, ceilings, and other building structures.
Technical Specifications
| Parameter | Value |
|---|---|
| Profile types | 16 mm resilient channel, 28 mm hat channel, 38 mm hat channel |
| Raw material | Galvanized, galvalume or cold-rolled steel |
| Yield strength | 235–550 MPa |
| Material thickness | 0.35–0.6 mm (customized) |
| Forming stations | 10 stations, GCr15 rolls, hard-chrome plated |
| Line speed | Up to 40 m/min |
| Cutting system | Servo tracking, hydraulic tracking shear |
| Cutting blade | Cr12MoV, burr-free edge |
| Profile tolerance | ±0.3 mm |
| Cutting length tolerance | ±1 mm |
| Changeover time | Under 30 minutes (16 / 28 / 38 mm) |
| Control system | PLC |
| Drive | Gear transmission; 50 mm shafts; 45# steel |
| Roller material | Cr12 |
| Punching | If need |
| Weight | 3,000 kg |
| Dimensions | 4,000 × 1,300 × 1,300 mm |
| Voltage | 380 / 415 / 460 V |
Customization and Optional Equipment
1. Profile to your drawing — section dimensions are set from your furring channel drawing
2. Thickness — 0.35–0.6 mm customized; galvanized, galvalume or cold-rolled steel
3. Quick-change cassette — switch between 16 / 28 / 38 mm profiles in under 30 minutes
4. Voltage — 380 / 415 / 460 V
5. Color — customized
6. Minimum order quantity — 1 set
FAQ: Furring Channel Roll Forming Machine
1. What is a metal furring channel?
A metal furring channel is a light-gauge cold-formed steel section that creates a level, ventilated fixing plane in front of a wall, ceiling or structural slab.
2. What material thickness can a furring channel roll forming machine form?
0.35–0.6 mm galvanized, galvalume or cold-rolled steel with a yield strength of 235–550 MPa. Thickness outside this range is available as a customized configuration.
3. Can one machine make hat channel and resilient channel?
Yes. The quick-change cassette lets one machine switch between 16 mm resilient channel, 28 mm hat channel and 38 mm hat channel in under 30 minutes.
4. How accurate is the cut length?
A hydraulic tracking shear cuts at full line speed with ±1 mm accuracy and a burr-free edge. Profile dimensions stay within ±0.3 mm.
5. What profile sizes does the machine cover?
Standard profiles are 16 mm resilient channel, 28 mm hat channel and 38 mm hat channel, plus U-shaped profiles for partition framing. Other sizes are made to your drawing.
6. What is included in after-sales service?
Installation supervision, operator training, 12-month warranty and lifetime technical support, with spare rolls shipped from stock.
Ready to work with us ？
Tianjin Putai Technology
Quick Links
Collection
Contact Us
Copyright © 2026 Tianjin Putai Technology Co.,Ltd | Sitemap | Privacy Policy