Metal Deck roll Forming Machine
Professional engineer is available across the world!
We make your machines run well, keep your business running well!
Machine Description
Item | Q’ty |
Hydraulic decoiler | 1 set |
Guiding device | 1 set |
Main roll forming machine | 1 set |
Hydraulic cutting device | 1 set |
PLC control system | 1 set |
Output table | 1 set |
Spare parts | 1 set |
Technical Parameters
Rollers Stations | 26 rows 26 filas |
Shaft diameter | 85 mm or as your requirement |
Steel Struture | 450# H steel Acero 450 #H |
Middle Plate | 18mm with Hanging plate material , thickened with square steel |
Motor Power | 15kw*2 sets |
Hydraulic Station | 4 kw |
Cutting System | Cutting Blade Material: Cr12, heat treatment HRC58-60 |
Cut-off Type | Hydraulic Slide Cutting |
Length tolerance | +/- 2mm |
PLC Control System | Delta PLC |
Raw Material Thickness | 0.8mm~1.2mm |
Produtivity | 8-12m/min |
Voltage | 380v50hz3p (or as your requirement) |
Feeding Width | 1250 mm |
Material | Colored Steel sheet, Galvanized steel sheet |
Spacer | Made of stainless steel pipe, lathe fnish, spate thickness 8 mm |
Chain | 1.5 inch |
Roller Material | 45# steel with quenching, surface chromed o.o3 mm |
Shaft Material | 45# steel |
Related Products
Roof Panel Roll Forming Machine
Cee Section Roll Forming Machine
Suspended Ceiling Grid Machine
Specification for Steel Channel Roll Forming Machine |
||
---|---|---|
Decoiler |
Weight | 150kg |
Steel coil ID | 450-550mm | |
Steel coil OD | 1500mm | |
Roll Forming Machine |
Rollers | 8-12 Rows |
Material: Cr12 | ||
Inner diameter:40mm Outer diameter:90mm | ||
Heat treatment hardness:HRC58-62 degree | ||
Transmission | The transmission is chain and gear | |
Middle Plate | Thickness is 25mm | |
Hydraulic System |
Power | 4/5.5KW |
Cutting System |
Servo Tracking System | Yes |
Cutting Material |
Cr12 |
Professional engineer is available to buyer’s factory
Make your metal frame machine runs well, keep your business running well!
Advantages of metal frame roll forming machinery
Steel c u channel roll forming machine’s performance is stable.
Metal frame roll forming machines are produced as client’ requirement
We can make and design roll forming machine according to customer’s request.
High quality machine with good price.
Stud and track roll forming machine’s design is essy to adjust, because of reasonable structure, high precision and high efficiency.
Low labor cost and fully automation save your money from every part!
Professional team for research and development
Provide professional engineer to buyer’s factory
We make your machines run well, keep your business running well!
Specification for C U steel channel baler(package machine) |
||
---|---|---|
Main machine body |
Frame | 80*80*3mm welded steel square pipe |
Steel coil ID | 420-450mm | |
Steel coil OD | 1000mm | |
Conveyor | thickened non-slip conveyor belt | |
Double hook material | Material: Cr12, heat treatment | |
Transmission shaft | 45# steel, and surface chrome coating | |
Screw | 2525 Ball screw | |
Lift part | Brake motor is adopted to continue to work | |
Push part | Servo motor; for better flexibility; chain drive | |
Slide | Using 45# steel,heat treatment surface coating chrome | |
Stuffing | TN cylinder is to prevent rotation | |
Marking |
positioning system | Manual adjustment, flexible operation, accurate positioning |
Advantages of steel c u channel package baler
The steel c u channel baler performance is stable. It is not noisy.
Save worker, save time, the most efficient, give you the most benefit.
We can make in the shortest time. We make this machine 1 set/day to reach market requirements.
High quality machine with reasonable price.
The design of blaer machine is easy to adjust, for it has reasonable structure, high precision and efficiency.
Low worker cost and ful-automation save your money from every part!
Professional team for technical research and development
Ask for price and solutions today!
Your inquiry will be replied as soon as possible, and we respect your privacy.